-40%

Mini Metal Lathe 1 hp 750 watt Mophorn Vevor Motor Kit Belt Pulleys Mount gear

$ 52.21

Availability: 13 in stock
  • Item must be returned within: 14 Days
  • Power Source: Home electric outlets
  • Model Year: 2020
  • MPN: Does Not Apply
  • Refund will be given as: Money Back
  • Maximum Spindle Speed: 2,056
  • Manufacturer Warranty: See description.
  • Type: Lathes
  • Voltage: 110 V, 115, V 120 V
  • Restocking Fee: No
  • Minimum Spindle Speed: 60
  • Control: Programmable Speed Control
  • Condition: New parts may have been installed and tested. Most parts show instal and remove marks from testing to insure they are fully functional. Includes machined in america adapters and mounts.
  • Machine Type: Mini Metal Lathe
  • All returns accepted: Returns Accepted
  • Phase: One Phase
  • Return shipping will be paid by: Buyer
  • Brand: The Custom Crafter
  • Suitable For: Aluminum
  • Model: Proto type 1

    Description

    This is a complete
    install
    kit to
    install
    your own Servo Motor.
    Fits Many Mini Metal Lathes.
    (see my other listings for a kit with motor)
    A complete set of all the adapters required to
    install
    an industrial sewing machine servo motor in the original motor location of your spindle drive mini metal lathe.
    Allows for complete
    reinstall
    of all threading gears and auto feed systems.
    In stock and ready to ship.
    Fits mini metal lathes that the drive belt goes directly to the spindle gear.
    Currently
    does not fit mini metal lathes that have an intermediate shaft (high/low gear). To fit these you would need a different top gear and a different belt.
    For those who want to use their own servo motor right now.
    The horsepower
    improvement
    and speed control is incredible.
    As long as you pick one of the right motors, this system provides full power at any speed and that includes Spindle RPM's as low as 60 RPM's
    Note: Individual parts: Motor mount - a timing belt with timing gears - the spacer or the spindle head bearing holder plate.
    Please contact me through eBay.
    This kit fits 1 HP 750 watt Vevor and Mophorn industrial sewing machine motors.
    If you are using a 3/4 hp
    servo
    motor
    you will need a different mount
    . I can make it for you and swap it out
    before
    shipping. that item will be listed soon
    Only fits the servo motors with the square face plate as seen in images. Does not fit other types.
    See it running,
    disassembly
    and
    programming
    on You Tube search for: "
    Mini Metal Lathe 1 HP Servo Motor 750 Watt Computer controlled with threading and gears"
    Same username the Custom Crafter
    Kit includes:
    The Custom Crafter made in the USA servo motor mount. This mount allows for full adjustment of motor both vertically and horizontally.
    This allows for perfect belt alignment. Mount only fits specific industrial sewing machine servo motors. See measurements in photos.
    The Custom Crafter made in USA aluminum spindle bearing locking plate which doubles as an adapter to allow for a larger drive belt. (See photos).
    The Custom Crafter made in USA aluminum spindle spacer. This mod is required to fit the larger drive belt required to manage the increased torque + the servo motors ability to change speed in seconds (see photos).
    A steel or aluminum spindle timing pulley, re-machined by The Custom Crafter to fit the mini lathe spindle shaft (see photos).
    This pulley fits 28mm spindles.
    Measured in inch = 1.100"
    Spindle shaft at timing gear and spacer = 1.102" ~ 1.110" most are 1.1003"
    A steel or aluminum motor timing pulley, re-machined by the Custom Crafter.
    This pulley fits servo motors with a 15mm shaft (see photos of motor).
    Measured in inch:
    Motor shaft = 0.589"
    Pulley bore = 0.592"
    A new toothed 1/2" wide timing belt to fit the increased width 1/2" wide drive pulleys.
    Small parts, the mounting nuts and washers come
    installed
    hand tight on the mount.
    Assembly requires some technical skill to include minor machine work.
    You will have to cut the diecast gear housing to allow additional room for the larger timing belt. (see photo)
    this can be done with a hacksaw and a file but a pneumatic cut off tool or die grinder will ease this job.
    Note: Check the photos in this listing. See the red lathe. If your lathe has holes instead of the normal slots, this motor adapter kit will not fit without your ability to slot the cast iron lathe bed. Additionally if you return this item for this reason, you will pay shipping
    both
    ways.
    A spreader wrench is a big help but this can be managed with a hammer and punch.
    You will need metric allen wrenches + a 13mm/1/2" deep socket and ratchet.
    some longer allen head metric allen head bolts may also be required, especially it you over tighten and strip the chinese ones provided with your machine.
    Notes:
    No refunds will be issued for damage caused by abuse.
    All lathes are dangerous, increasing the
    horsepower
    increases this danger.
    It is your
    responsibility
    to insure fit and proper application. We make no
    guarantee
    of
    safety
    , application or that this
    product
    is suitable for your intended use.
    Our liability is limited to the purchase price of this item.
    Shipping:
    Ships USPS ground in a small flat rate box.
    Returns:
    This kit is listed on eBay as for parts only, not working. That is because you have to fit it and make it work.
    I will accept a return for up to 30 days from
    the purchase date. No reason for a return is required. What is required is that you contact me through eBay or the text number included on the
    receipt for install or return assistance.
    For a return you will have to pay return shipping with tracking
    Buyer pays shipping both ways
    :
    Buyer has 25 days from the time he/she receives this item as shown by tracking to get a return authorization.
    Seller usually responds in under 24 hours.
    Buyer has 10 days ship time to have the return at the sellers address. 10 day period starts when seller issues the return authorization.
    Seller will inspect returned parts and if it passes, seller will issue a refund of the purchase price less shipping.
    All original parts must be returned to get a refund.
    All original parts must be in the same condition as you
    received
    them in.
    No return/refund authorizations will be issued after the 30 day period.
    You refund will be credited back to the original account that paid for this item.
    Your refund will be for the original .80 only. all shipping fees are not refundable.